ROBUST CASE
Description
Aluminum Home Display Case, RC-DP-017
The Aluminum Home Display Case RC-DP-017 is the long-format presenter of the home display range, sized for collections that read as rows. Measuring 485 × 285 × 130 mm externally, the 485 mm length holds a watch roll, a pen series, a row of model vehicles, or a sequence of memorabilia pieces laid out side by side in a single line. The format dealers and serious collectors prefer, because a row is counted, compared, and photographed in one pass. As with the whole range, the case presents by opening the lid and secures by closing and locking it: the same object is a display platform at the counter and locked storage on the shelf. A rigid 6063-T5 aluminum alloy frame with MDF panels delivers the structural stability a long lid demands, and heavy-duty locks, reinforced corners, a full-length hinge, and a balanced carry handle are specified for a case that is opened, shown, closed, and carried routinely.
Length changes how a collection is managed. The 485 × 285 mm platform holds a complete row-format set in one visible plane, so the count that leaves the safe is the count that is verified at closing time, an empty cavity is an immediate, visible signal, not a discovery made later. The 130 mm depth clears taller pieces that a flat tray cannot accommodate: boxed items, small figurines, and cased watches sit upright in their cavities rather than lying on their sides. The extruded T-slot frame secures the panels without exposed fasteners, producing a clean exterior that will not snag in a cupboard or on shelving, and the continuous hinge keeps a long lid tracking true across thousands of cycles. Stamped steel corner guards riveted at two points per corner shield the edges that take the impact when a long case is set down at a venue or loaded into a vehicle. Inside, custom-cut EVA, PE, or EPE foam is engineered around the actual collection, row cavities, finger reliefs, and optional dividers, so every piece holds its position on display, in storage, and in transit.
Key Features
- Long 485 × 285 mm Platform: Holds a complete row-format collection in one visible line, so pieces are counted, compared, and photographed in a single pass.
- 130 mm Depth for Taller Pieces: Clears boxed items, small figurines, and cased watches that flat trays force to lie on their sides.
- Rigid 6063-T5 Aluminum Frame: An aluminum alloy profile frame with MDF panel reinforcement keeps a long lid square and sealing correctly across years of handling.
- Custom-Cut Foam Interior: Precision-cut EVA, PE, or EPE foam with row cavities, finger reliefs, and optional dividers gives every piece a dedicated fixed position.
- Reinforced Steel Corner Guards: Stamped steel corners riveted at two points per corner absorb the impacts long cases take at venue tables, tailgates, and shelf edges.
- Full-Length Hinge and Heavy-Duty Locks: A continuous hinge maintains alignment across the full opening span, and robust locks secure the collection in storage and transit.
- Four Surface Finishes: ABS, aluminum, leather, or stainless steel panels match home interiors, retail branding, or a discreet professional presentation.
- OEM/ODM Ready Platform: Branding, foam layout, surface finish, hardware, and packaging can all be specified per programme, from a single prototype through to repeat volume orders.
Technical Specifications
| Model No. | RC-DP-017 |
| External Dimensions | 485 × 285 × 130 mm (L × W × H) |
| Internal Dimensions | Customizable interior layout, foam insert configuration confirmed with order |
| Construction | Aluminum Profile Frame + MDF Panel |
| Surface Options | ABS / Aluminum / Leather / Stainless Steel |
| Hardware | Heavy-Duty Locks, Reinforced Corners, Full-Length Hinge, Carry Handles |
| Interior | Custom-Cut EVA / PE / EPE Foam, Adjustable Dividers |
| Weight | Varies by configuration, exact weight confirmed with quotation |
| Logo Customization | Silk-Screen / Laser Engraving / UV Printing / Metal Nameplate |
| Minimum Order Quantity | Negotiable |
| Lead Time | 15-30 days (depending on order quantity and customization) |
| Certification | ISO 9001 |
Applications
Row-format collection display is the primary use. Watch collectors lay out a roll in sequence, pen collectors present a full series, and model and memorabilia collectors arrange vehicles, badges, or figures in a countable line, presented by opening the lid, secured by closing it. Dealers and trunk-show sellers use the same format commercially: a full row travels to a venue, is displayed from the case, and is counted back in at closing time. Appraisal, insurance documentation, and photography benefit equally, because a row-format layout presents the collection in order and repacks it without improvisation.
The RC-DP-017 also suits small exhibitions, club meetings, and consignment events where a curated line of pieces must arrive complete and leave the same way, and collectors who rotate long-format displays between a presentation case and locked storage. In a display case range, the RC-DP-017 is the long row-format option: the compact model covers smaller single-tier sets, and deeper formats cover tiered or three-dimensional displays that exceed the 130 mm profile.
OEM/ODM Customization
Every JJ home display case can be adapted to the row-format collection it carries and to where it is shown. Our OEM/ODM service covers branding, interior engineering, materials, hardware, and packaging, with engineering support from the initial tray layout proposal through to production tooling and repeat orders.
Custom Logo & Branding: Your identity is applied by silk-screen printing, laser engraving, UV printing, or an embossed metal nameplate, selected to suit the panel material and the duty cycle the case has to survive. We match Pantone references for volume programmes and position artwork identically across every unit in a fleet, so a team arriving at ten different sites still presents one coherent brand.
Custom Foam Inserts: We engineer custom-cut EVA, PE, or EPE foam around your actual equipment set, precision cavities, layered tiers, finger reliefs, and cable channels that keep instruments, tools, and accessories in fixed positions through repeated transit. Send us product dimensions or sample parts and we return a layout proposal before tooling begins.
Color & Surface Finishes: Panels can be produced in ABS, aluminum, leather, or stainless steel with custom colors, grains, and textures, letting you match corporate identity, vehicle livery, or site safety coding. Cases can also be color-coded by department, product line, or service region so the right kit is identified before the lid is even opened.
Dimension Modifications: Length, width, height, and internal layout can be adjusted to accommodate specific equipment, rack units, or transport constraints such as courier dimensional limits, vehicle load spaces, and airline checked-baggage rules, subject to minimum order quantities.
Hardware & Security Options: Lock, handle, hinge, wheel, and corner configurations can be upgraded to match how the case is actually handled, keyed-alike lock sets for multi-case fleets, combination locks for shared equipment pools, reinforced corners and edge extrusions for freight-forwarded loads, and additional latches for high-value kits that must stay sealed until they reach the end user.
Private Label Packaging: We support private label programmes with custom cartons, printed manuals, product labels, and barcodes, enabling distributors and brand owners to ship straight to end customers without secondary repackaging or relabelling at a regional warehouse.
Bulk Order & Export Support: Serving clients across Europe, North America, the Middle East, and Southeast Asia, we provide export documentation, export-standard packaging, and coordinated logistics for bulk and repeat orders. Contact our sales team with your equipment dimensions, target quantity, and branding requirements for a fast, detailed quotation.
