ROBUST CASE
Description
Aluminum Home Display Case, RC-DP-002
The Aluminum Home Display Case RC-DP-002 is the compact all-rounder of the JJ collector range, built for mixed collections that combine flat pieces with items of modest height: signed memorabilia, graded trading cards, watches, coins, medals, and small framed pieces that deserve a rigid, lockable home rather than a drawer or a shelf exposed to dust. Measuring 365 × 285 × 110 mm externally, the 110 mm cavity accepts both single-plane layouts and shallow contoured foam, while the compact footprint keeps the case at home on a bookshelf, in a display cabinet, or in a vehicle on the way to a collectors’ show. A rigid 6063-T5 aluminum alloy frame combined with MDF panels gives the shell the torsional stiffness that keeps it square after years of handling, and heavy-duty locks, reinforced corners, a full-length hinge, and a balanced carry handle complete a case designed to be opened, presented, and locked again many times over its life.
The 365 × 285 mm base is sized around a versatile display plane. A signed photograph sits beside its certificate, a watch set beside its papers, a graded-card run in individual recessed pockets, arranged once and shown as one composed layout every time the lid opens. That arrangement discipline is also what protects the contents: custom-cut EVA, PE, or EPE foam gives each piece a dedicated cavity with nothing resting on anything else, and finger reliefs allow gentle removal without gripping delicate surfaces. The extruded T-slot frame secures the panels without exposed fasteners, producing a clean, tamper-resistant exterior that resists dust ingress and will not snag on neighbouring items in a cabinet. Stamped steel corner guards riveted at two points per corner absorb the knocks that occur at door frames and table edges, and the full-length hinge keeps the lid tracking true across years of opening. When the case is closed, keyed locks hold the collection secure between viewings.
Key Features
- Versatile 110 mm Display Cavity: Accepts both single-plane layouts and shallow contoured foam, covering flat pieces and items of modest height in one case.
- Compact 365 × 285 mm Base: Sized for signed prints, watch sets, graded-card runs, and document-format memorabilia, and for the bookshelf or cabinet it lives on.
- Rigid 6063-T5 Aluminum Frame: An aluminum alloy profile frame with MDF panel reinforcement resists racking and twist, keeping the lid square and seating correctly after years of handling.
- Custom-Cut Foam Interior: Precision-cut EVA, PE, or EPE foam gives each piece a dedicated recessed cavity with finger reliefs for gentle removal.
- Lockable Collector Security: Keyed heavy-duty locks secure the collection between viewings, in transit to shows, and in shared households or office display areas.
- Reinforced Steel Corner Guards: Stamped steel corners riveted at two points per corner absorb the impacts that occur at door frames, table edges, and the corners of display cabinets.
- Four Surface Finishes: ABS, aluminum, leather, or stainless steel panels let the case present as discreet, luxurious, or institutional, matched to the room it lives in.
- OEM/ODM Ready Platform: Branding, foam layout, surface finish, hardware, and packaging can all be specified per programme, from a single prototype through to repeat volume orders.
Technical Specifications
| Model No. | RC-DP-002 |
| External Dimensions | 365 × 285 × 110 mm (L × W × H) |
| Internal Dimensions | Customizable interior layout, foam insert configuration confirmed with order |
| Construction | Aluminum Profile Frame + MDF Panel |
| Surface Options | ABS / Aluminum / Leather / Stainless Steel |
| Hardware | Heavy-Duty Locks, Reinforced Corners, Full-Length Hinge, Carry Handles |
| Interior | Custom-Cut EVA / PE / EPE Foam, Adjustable Dividers |
| Weight | Varies by configuration, exact weight confirmed with quotation |
| Logo Customization | Silk-Screen / Laser Engraving / UV Printing / Metal Nameplate |
| Minimum Order Quantity | Negotiable |
| Lead Time | 15-30 days (depending on order quantity and customization) |
| Certification | ISO 9001 |
Applications
Private collectors are the primary users. Signed items, game-used equipment, trading cards in graded slabs, championship rings, and framed photographs are arranged once in custom-cut foam cavities, opened for viewing and photography, then locked away, no re-handling, no re-arranging. Championship trophies, academic medals, service insignia, and achievement plaques travel in a case that presents them respectfully rather than wrapping them in bubble film, and the compact footprint means the case stores where the collection lives.
Dealers, auction houses, and authentication services apply the same logic commercially: items in transit between consignor, grader, and buyer need a rigid, lockable carrier that presents well when opened in front of a client. Museums and heritage organisations use the format for small travelling exhibits and loan material that must survive repeated handling while remaining presentable. Within the JJ range, the RC-DP-002 is the compact all-rounder: the RC-DP-003 covers flat collections on a single plane, the deeper RC-DP-004 handles standing pieces on layered tiers, and the largest model in the series carries full multi-piece collections.
OEM/ODM Customization
Every JJ display case can be adapted to the collection it carries and to the way that collection is shown, stored, and moved. Our OEM/ODM service covers branding, interior engineering, lid and panel materials, hardware, and packaging, with engineering support from the initial foam layout proposal through to production tooling and repeat orders.
Custom Logo & Branding: Your identity is applied by silk-screen printing, laser engraving, UV printing, or an embossed metal nameplate, selected to suit the panel material and the duty cycle the case has to survive. We match Pantone references for volume programmes and position artwork identically across every unit in a fleet, so a team arriving at ten different sites still presents one coherent brand.
Custom Foam Inserts: We engineer custom-cut EVA, PE, or EPE foam around your actual equipment set, precision cavities, layered tiers, finger reliefs, and cable channels that keep instruments, tools, and accessories in fixed positions through repeated transit. Send us product dimensions or sample parts and we return a layout proposal before tooling begins.
Color & Surface Finishes: Panels can be produced in ABS, aluminum, leather, or stainless steel with custom colors, grains, and textures, letting you match corporate identity, vehicle livery, or site safety coding. Cases can also be color-coded by department, product line, or service region so the right kit is identified before the lid is even opened.
Dimension Modifications: Length, width, height, and internal layout can be adjusted to accommodate specific equipment, rack units, or transport constraints such as courier dimensional limits, vehicle load spaces, and airline checked-baggage rules, subject to minimum order quantities.
Hardware & Security Options: Lock, handle, hinge, wheel, and corner configurations can be upgraded to match how the case is actually handled, keyed-alike lock sets for multi-case fleets, combination locks for shared equipment pools, reinforced corners and edge extrusions for freight-forwarded loads, and additional latches for high-value kits that must stay sealed until they reach the end user.
Private Label Packaging: We support private label programmes with custom cartons, printed manuals, product labels, and barcodes, enabling distributors and brand owners to ship straight to end customers without secondary repackaging or relabelling at a regional warehouse.
Bulk Order & Export Support: Serving clients across Europe, North America, the Middle East, and Southeast Asia, we provide export documentation, export-standard packaging, and coordinated logistics for bulk and repeat orders. Contact our sales team with your equipment dimensions, target quantity, and branding requirements for a fast, detailed quotation.
